spacer
spacer
spacer
Ever-Green Seasons logo
evergreen_header_image
Ever-Green Watering Systems Home Page Christmas tree watering product Where to buy Ever-Green For Retailers Only Contact Ever-Green tree watering systems Press Area - Evergreen Tree Watering System About Ever-Green Seasons

Watering Systems

Fit to Your Tree

Tree Care

Watch the Demo!



A. Tube Clip B. Velvet Bow C. Water Tube
   D.
Christmas Present Tank & Lid
Christmas tree watering system

 You must install the Ever-Green Watering System before adding water to your tree stand.
Christmas tree watering system
The Ever-Green Watering System is quick and easy to install.
Please refer to what type of tree stand you have for specific directions.
Ever-Green tree watering system directions
1. Place Ever-Green Watering System’s Tank on the floor beside your tree. Option 1 - Remove the adhesive from the Tube Clip "A1" and stick on the upper edge inside your tree stand reservoir with the tube extending down. Note: the clip should already be attached to the tube ("C"), if not, insert one end of the Tube ("C") into the Tube Clip ("A1") about 6" from the end. If your tree stand does not accommodate theTube Clip ("A1") in your tree stand, please use Option 2.
or
Ever-Green tree watering system directions Option 2 Remove the Tube Clip and place the Watering Tube (“C”) into the tree stand reservoir, then secure it to the tree trunk with the Twist-Tie (“A2”). Once the Water Tube is firmly secured to the tree trunk cut off the tail of the Twist -Tie. For both Option 1 & 2 - EXTEND THE WATERING TUBE TO THE BOTTOM OF THE TREE STAND RESERVOIR. Then Plug the other end of the Watering Tube (“C”) into the valve found on the Tank (“D”) of the watering system.
Ever-Green tree watering system directions 2. Fill the Ever-Green Watering System Tank (“D”) with 2 gallons of water. Do not pour water directly into the tree stand. After filling the Tank (“D”) with water, elevate the Tank a few feet to allow the water to flow into the tree stand. The Watering Tube (“C”) should be filled with water. When the tree stand is half full with water, place the Tank back on the floor. Larger tree stands may need more water added to the tank after installation. Do not fill the Tank higher than 1” below the top of your tree stand height.
Ever-Green tree watering system directions 3. Attach the Velvet Bow (“B”) to the top of the Tank Lid (“D”). Refill the Ever-Green Watering System as needed, no higher than 1” below the top of the tree stand reservoir. The average fresh tree will need to be frequently checked and filled every day. Avoid letting the Watering System run out of water, if it does, repeat steps #1, #2 & #3 to restart the system.
 
evergreen_footer_image
HOME | PRODUCTS | WHERE TO BUY | DEALER | CONTACT | PRESS | ABOUT US
830 South Broadway • Tarrytown, NY 10591 • P: 303-320-4100• F: 303-393-0444
Copyright ©2004 , Ever-Green Watering Systems. All rights reserved.
Web services provided by Max Media Solutions.